For decades there was just one single efficient way to store info on your personal computer – utilizing a hard drive (HDD). Nonetheless, this kind of technology is by now expressing it’s age – hard disk drives are actually loud and slow; they’re power–ravenous and have a tendency to create a great deal of heat for the duration of intensive operations.

SSD drives, however, are quick, take in far less energy and tend to be far less hot. They offer an innovative approach to file accessibility and storage and are years in front of HDDs in terms of file read/write speed, I/O operation and then power efficacy. See how HDDs stand up against the more recent SSD drives.

1. Access Time

Image

With the arrival of SSD drives, data access rates are now over the top. Due to the brand–new electronic interfaces found in SSD drives, the average data file access time has been reduced to a record low of 0.1millisecond.

Image

HDD drives depend on rotating disks for data storage reasons. Every time a file will be used, you need to wait for the right disk to reach the right place for the laser to reach the file in question. This results in a common access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

As a result of the completely new radical file storage technique incorporated by SSDs, they give you a lot quicker file access rates and swifter random I/O performance.

During our tests, all SSDs showed their capacity to manage a minimum of 6000 IO’s per second.

Image

With a HDD drive, the I/O performance steadily increases the more you use the hard drive. Nevertheless, once it actually reaches a specific restriction, it can’t proceed faster. And because of the now–old concept, that I/O cap is much below what you can have with a SSD.

HDD can only go as far as 400 IO’s per second.

3. Reliability

Image

The lack of moving elements and spinning disks within SSD drives, as well as the latest developments in electronic interface technology have generated a substantially less risky file storage device, having a normal failure rate of 0.5%.

Image

For the HDD drive to operate, it must spin a pair of metal disks at more than 7200 rpm, retaining them magnetically stable in the air. There is a good deal of moving components, motors, magnets and also other devices packed in a small space. Therefore it’s obvious why the regular rate of failure associated with an HDD drive varies between 2% and 5%.

4. Energy Conservation

Image

SSDs do not have moving parts and need almost no chilling power. They also involve not much energy to perform – trials have shown they can be powered by a normal AA battery.

As a whole, SSDs take in amongst 2 and 5 watts.

Image

From the moment they have been built, HDDs have always been quite electrical power–heavy products. And when you have a hosting server with lots of HDD drives, it will add to the regular monthly electric bill.

Normally, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives enable swifter file accessibility speeds, which will, consequently, enable the processor to complete data file calls much faster and to return to different responsibilities.

The average I/O hold out for SSD drives is simply 1%.

Image

HDD drives permit slower access speeds in comparison with SSDs do, which will result in the CPU having to wait around, although scheduling resources for the HDD to uncover and return the required data file.

The typical I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

The majority of our completely new web servers are now using simply SSD drives. Our personal lab tests have revealed that utilizing an SSD, the common service time for any I/O request although doing a backup remains below 20 ms.

Image

Throughout the identical tests with the exact same web server, this time equipped out with HDDs, effectiveness was much slow. All through the hosting server data backup process, the average service time for I/O calls ranged between 400 and 500 ms.

7. Backup Rates

Image

Referring to back–ups and SSDs – we have spotted an exceptional enhancement with the backup speed since we turned to SSDs. Currently, a typical web server data backup requires merely 6 hours.

Image

Alternatively, with a hosting server with HDD drives, a comparable back up usually takes 3 to 4 times as long in order to complete. An entire backup of any HDD–driven server may take 20 to 24 hours.

The Linux VPS servers and then the standard cloud web hosting service accounts offer SSD drives automatically. Be a part of our family here, at CrownHost, to check out how we could help you boost your website.

  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is put together for you free. 99.9% network uptime. Full root/administrator access.

  • Compare our prices

  •  
  • Check out our prices and choose the perfect Virtual Private Server for your active web sites. You’re able to move up to a more powerful VPS package with simply a mouse click.
  • Compare our hosting plans

  • Contact Us

  •  
  • You can easily get in contact with us 24x7 by email or by making use of our super–fast ticketing platform. Our company offers a 1–hour response time warranty.